92F Petroleum Supply Specialist Alpha Module Practice Test

These questions are part of the practice quiz. Start practicing

• What is not authorized unless approved and signed by the commander?
• Steps when fuel gets on skin which action is a correct immediate step?
• Friction loss is defined as which description?
• Which component is used to drain water from the system?
• The air vent assembly is used as a...
• What is the purpose of grounding and bonding during fuel transfers?
• What does the acronym P.A.S.S stand for?
• The suction port assembly does what
• What is the purpose of an in-line filter/separator in a fuel system?
• An example of a class B fire is?
• How can water contamination in a fuel sample be identified?
• Why is sampling performed at multiple points within a storage tank?
• Filter performance checks are recommended every how many days?
• How far does a small spill extend?
• Which component is described as a round disk?
• Which equipment uses 350 GPM pumps?
• When changing elements, what should be done on the element itself?
• What is cloud point in fuels?
• What is the second step of the filtering process?
• Which statement about the monitor sizes is accurate?
• What is the range of an LEL?
• What is the yellow psi range, and what does it mean?
• Purple K extinguishers are suitable for which classes?
• Recirculation is defined as which of the following, and how often should it be performed?
• What is pour point in fuels and how does it affect handling?
• Impeller is the ...
• Which systems are served by USMC 600 GPM filters?
• What is priming in a pumping system?
• Which component is described as the hollow inner of the pump housing?
• Purple K is used to put out what class of fires?
• How do you discard petroleum waste?
• How often should recirculation be performed?
• What are the three types of fuel spills?
• Contain leaks: which option is recommended?
• What is advised if someone swallows fuel?
• Which approach best describes environmental protection in fuel operations?
• Course ground is how deep when putting a ground in?
• A spill of 1,500 gallons occurs inland. Which discharge classification applies?
• The casing is the .... Of the pump housing
• Viscosity is the ...
• 800 GPM pumps are used for what type of equipment and what branch uses them?
• Water-based extinguishers are used to put out which class of fires?
• Carbon dioxide is used to put out what class of fires?
• What should be included in a standard fueling area emergency response plan?
• What is the name of the system associated with 225 GPM pumps?
• Which is a valid type of fuel spill?
• Which statement best describes the function of a fuel distribution pump?
• The volute is the ... of the pump housing
• Why does an LEL not burn?
• What is the purpose of water detection paste in field testing?
• Disposal method for petroleum waste?
• USMC 600 GPM filters are used for which systems, and how many elements and canisters?
• What are the two most common contaminants monitored by a fuel quality surveillance program?
• Dry powder extinguishers are used to put out what class of fires?
• 800K FSSP is used by which branches?
• How often should the performance of filters be checked?
• Which statement best explains the purpose of receipt testing?
• What are the three causes of fuel spills?
• What is the recommended action if a sample test shows abnormal results?
• LEL stands for which phrase?
• What is a filter element?
• What are the two standard sizes for marine fuel monitors?
• What PPE should be worn when handling fuels in hot weather?
• How should spill reporting be determined?
• Type-1 50 GPM filters are used for what type of use?
• What is the immediate first action if fuel gets into the eyes?
• How do you maintain fuel accountability from receipt to issue?
• Why is training in both field and garrison fueling operations important?
• According to the material, how many types of fuel spills, how many causes of spills, and how many classifications of discharge exist?
• Which approach best supports preventing theft or loss of fuel at a storage site?
• How should fuel inventory be managed during a mission-critical operation?
• Which of the following is the correct control measure for fire/ignition risk during fuel handling?
• Silt is how deep when putting a ground in?
• Which practice helps ensure the integrity of fuel sampling?
• If clothing is contaminated with fuel, what should you do first?
• Name two field tests commonly used for aviation fuels.
• What is the purpose of a tank gauge and why must it be calibrated?
• What is the difference between 'receipt' and 'issue' documentation?
• What is the purpose of a fuel handling SOP?
• Which action is NOT a recommended practice for maintaining field sampling integrity?
• If more than what psi is observed, fuel flow is restricted?
• Medium discharge for inland and coastal is
• What does Firefighting Tactics require?
• Which class is a house fire an example of?
• Minor discharge for inland and coastal is defined as:
• When a fuel spill is detected, to whom should you report the incident?
• What are the colors on a gauge?
• Which document records the movement of fuel into storage from a supplier?
• How often do fire extinguishers need to be inspected?
• 300 GPM filters are used for which models and how many elements, canisters, and go/no fuses?
• What practice helps prevent cross-contamination when storing fuels?
• Which GPM filter size is associated with Forward Area Refueling Equipment?
• Which action is not a recommended step if fuel contacts the skin?
• “Take the one with the most” refers to which factor?
• What are the three main components of a fuel quality surveillance program?
• How can you prevent theft or loss of fuel at a storage site?
• How do you verify the grade of fuel before issuing it?
• What are common signs of a faulty fuel pump?
• What approach is described for cleanup on land?
• What is the key to petroleum fire safety?
• How far does a large spill extend?
• How should cross-contamination be prevented when storing multiple fuel types?
• What is the risk of mixing fuels with incompatible additives?
• The water drain valve is used to...
• 350 GPM pumps are used for what equipment and by which branch?
• When a spill is discovered, you must ________.
• What actions should you take if you detect a fuel spill?
• Which class of fires can a dry chemical extinguisher be used on?
• 600 GPM pumps are used for what type of equipment and which branch uses them?
• Why does a UEL not burn?
• Electrical fires are which class?
• How many filter canisters do 350 GPM filters have?
• Use of cell phones and other electronic devices during the refueling process is...
• What steps are involved in validating an issued quantity to a customer?
• Besides adsorbents and absorbents, what are other methods for dealing with water cleanup?
• To ensure representative sampling of a tank, which practice should be used?
• How many sizes do marine fuel monitors come in?
• How should you document a fuel transfer to ensure traceability?
• A spill of 15,000 gallons inland is classified as which discharge?
• Why is a 'no smoking' policy critical in fueling areas?
• Which statement best describes the environmental protection approach in fuel operations?
• 100 GPM pumps are used for what type of equipment and what branch uses them?
• How does temperature affect fuel quantity measurements?
• In fuel testing, a deviation in specific gravity from the expected value could indicate what?
• Final sampling in a fuel quality surveillance program serves to
• What is the purpose of a fuel property test in cold weather operations?
• 100 GPM filters are used for which equipment and how many elements and canisters do they have?
• IPDS is integrated with pump stations operated by which branch?
• What does specific gravity tell you in fuel testing?
• What do you use to catch leaks?
• In JP-8, what is the primary purpose of corrosion inhibitors?
• What does SCP stand for?
• Which soil type requires a 4-foot grounding depth?
• What does the smoke limit sign say?
• What RPM is associated with the system that uses 225 GPM pumps?
• Which statement about corrosion inhibitors is true?
• What does SDS stand for in chemical safety contexts?
• What is the green range on the psi scale, and what does it mean?
• What is the range of an UEL?
• Which option correctly lists the standard sizes for marine fuel monitors?
• Feet of head is...
• How should different fuels be labeled and stored to prevent errors?
• Friction loss is the...
• Smokers should keep away from fueling areas by a distance of how many feet, according to standard safety signs?
• UEL stands for which phrase?
• Which statement correctly describes the interval and marking requirement for element changes?
• Which labeling practice helps prevent cross-contamination when storing fuels?
• The vent valve or air eliminator is the ...
• Which statement best describes a day tank?
• Which of the following is true about 350 GPM filters?
• Differentiate between a day tank and a bulk storage tank.
• An example of a class C fire is?
• SCP expands to what term?
• Minor discharge inland is defined as less than 1000 gallons; what is the threshold value?
• What is the function of a fuel distribution pump?
• Which of the following is an example of an adsorbent?
• What does SCP stand for in spill response, and what does it indicate?
• What is the role of a bulk fuel storage facility in Army operations?
• Which statement correctly describes the frequency and marking for element changes?
• What do go-no-go fuses do?
• What is the purpose of maintaining chain of custody for a fuel sample?
• Which action requires command approval and signature?
• How can sampling integrity be maintained when field conditions are challenging?
• Which grounding material requires the deepest depth among silt, clay, and course ground?
• Which branch uses the equipment associated with 350 GPM pumps?
• Which maintenance activity is required daily as part of engine fuel management?
• What does SDS stand for?
• What is an anti-icing additive in jet fuels, and why is it used?
• Type-2 50 GPM filters are used for what and how many elements and canisters do they have?
• What is the rule regarding cell phones and electronic devices during refueling operations?
• Which combination of details is essential to maintain traceability for a fuel transfer?
• Why is sampling from an appropriate depth in a storage tank important?
• What is the importance of a chain of custody in fuel sampling?
• What is the two-person rule and why is it used?
• If psi is red, what is required?
• Which option lists both standard sizes for marine fuel monitors in a way that makes the correct choice last?
• Name a common Army aviation fuel.
• 50 GPM pumps are used for what type of equipment and what branch uses them?
• What is the range of an explosive range?
• Which of the following is an example of an absorbent?
• Clay is how deep when putting a ground in?
• A coastal spill of 50,000 gallons is classified as which discharge?
• A coastal spill of 8,000 gallons is classified as which discharge?
• 150 GPM pumps are used for what type of equipment and what branch uses them?
• Water In Fuel (WIF) is problematic because it can cause
• Which test measures the temperature at which aviation fuel vapors will ignite (the test used to assess flammability)?
• If psi is yellow, what should you do?
• Which component acts as the first stage of filtration?
• What is the red psi range, and what does it mean?
• 240 GPM filters are used for which system, and what is their element configuration?
• Major discharge for inland and coastal is
• How many main fire classes are there?
• Why is using clean containers important for sampling integrity?
• Which statement most accurately reflects the overarching safety principle for petroleum operations?
• Which range represents the explosive range (.7 to 5%)?
• Cavitation occurs when?
• Which color is not on the gauge?
• Which methods are listed for land cleanup along with mechanical equipment and EPA-approved chemicals?
• Which approach best supports overall fuel accountability from receipt to issue?
• Why is it important to label storage tanks and keep separate piping when storing different fuels?
• What is the purpose of a distribution line isolation valve?
• How many classifications of discharge are described in the material?
• How far does a small priming spill cover?
• What are the three classifications of discharge?
• If psi is green, what does this indicate regarding the elements?
• An example of a class D fire is?
• Why is proper filtration critical before delivering fuel to engines?
• 225 GPM pumps are used for what type of equipment and what branch uses them?
• How many filter elements do 100 GPM filters have?
• What is the primary objective of the 92F Alpha Module?
• Water-based extinguishers are used to put out what class of fires?
• Which set of items belongs in a standard fueling area emergency response plan?
• What is the overarching safety principle for all petroleum operations?
• Spontaneous combustion is caused by which of the following?
• Describe a standard procedure for collecting a representative fuel sample from a storage tank.
• Which range represents the lower explosive limit (LEL) in percent?
• 350 GPM filters are used for what, and how many elements and canisters?
• The outlet allows fuel to...
• What are the two types of go-no-go fuses?
• An example of a class A fire is?
• When changing elements, what is the required frequency and marking?